濟南模型公司
  • 濟南市市中區
  • 經十西路6288號1號樓101室
  • 電話:0531-55504101
  • 網站:http://www.zhrrgk.icu
  • 手機:18660800958 13869134430
新聞中心當前位置:首頁-新聞中心
    建筑模型的木頭的處理方式都有哪些?
    2020-1-14 15:26:57 來源:http://www.zhrrgk.icu

    木材是建造沙盤模型的常用材料,但一般在制作模型之前,木材都要采取一些處理措施。如果需要切割、打磨、拼接等。只有處理好材料,才能使建筑模型達到預期的效果。讓我們來看看板子的處理過程。

      Wood is a common material to build sand table model, but generally before making the model, some measures should be taken to deal with the wood. If cutting, grinding, splicing, etc. is required. Only when the materials are properly treated can the building model achieve the expected effect. Let's take a look at the processing of the board.

      如何處理用于建筑模型的木板:

      How to deal with boards for building models:

      1. 可能的彎曲:木材應彎曲在前面和后面的橢圓形翼尖或薄殼機身。主要方法有:火烤、煮、冷彎。可以根據自己的喜好使用。

      1. Possible bending: the wood should be bent at the front and back of the elliptical wingtip or thin shell fuselage. The main methods are: roasting, boiling and bending. It can be used according to your own preference.

      2. 可能的拼接:用于木片的加寬和加長。剪接后注意保持平整。

      2. Possible splicing: used for wood chip widening and lengthening. Pay attention to keep flat after splicing.

      3、需要刨平:由于現在多用于生產材料刨平,一般很少刨木、木片,除非自己生產或活動用特殊規格的材料。現在,在制作較大的模型體或仿真模型時,為了提高工作效率和生產質量,有必要采用平面法對曲面進行修整。

    濰坊模型公司

      3. Need to be planed: because now it is mostly used for the production of material planing, generally there is little planing of wood and wood chips, except for materials of special specifications used for self production or activities. Now, in order to improve work efficiency and production quality, it is necessary to use the plane method to trim the surface when making large model or simulation model.

      4、需裁切:將木屑多余部分裁切下來,或從木屑中裁切出所需的木材及前后邊緣、腹板、翼肋等。切割時,注意木紋的方向,力先輕后重逐漸增加力,直到切割時,不要用刀切割,尤其在切割圓弧時更要注意。

      4. To be cut: cut off the surplus wood chips, or cut out the required wood, front and rear edges, webs, ribs, etc. from the wood chips. When cutting, pay attention to the direction of the wood grain, and gradually increase the force after the force is light, until cutting, do not use a knife to cut, especially when cutting the arc.

      5、需要打磨:打磨時向木紋方向用力,先要均勻重然后輕,并選擇合適的砂紙進行打磨。水砂紙常用于拋光前。

      5. Need to be polished: when grinding, use force in the direction of wood grain, first evenly heavy and then light, and select appropriate sandpaper for grinding. Water sandpaper is often used before polishing.

      事實上,木質材料有很多細分,不同的建筑模型在材料選擇上可能會有一些細微的差異。我們建議根據自己的建筑風格特點,適當選擇材料。另外,其實在制作木質建筑造型時,也可以適當添加一些輔助材料制作,如有機玻璃、水晶玻璃等,來襯托其獨特的魅力,使其更有靈感。

      In fact, wood materials have many subdivisions, and different building models may have some subtle differences in material selection. We suggest that we should choose appropriate materials according to our own architectural style. In addition, in fact, when making wood building modeling, you can also add some auxiliary materials, such as plexiglass, crystal glass, etc., to set off its unique charm and make it more inspired.

      以上就是濰坊模型公司對制作建筑模型的木頭的處理方式都有哪些的詳細介紹,想要了解更多請點擊官網http://www.zhrrgk.icu

      The above is a detailed introduction of Weifang model company's wood processing methods for building models. To learn more, please click http://www.zhrrgk.icu


    版權所有:濟南市槐蔭區視野模型設計制作中心 Copyright @ 2011-2012 電話:18660800958  傳真:0531-55504101 魯ICP備11014722號 地址:濟南市市中區經十西路6288號1號樓101室 
    網址:http://www.zhrrgk.icu
澳洲幸运10是哪里的 江西11选五多乐彩走势图 山东11选5中奖规则 精准四肖三期必开一期 广东26选5开奖结果查 股票私募发行方式 广西快乐十分破解 浙江20选5开奖玩法 明日股市点评 七星彩开奖结果表 七乐彩选号技巧大全 云南11选5今今天 江西多乐彩500网 股票配资推荐公正卓信宝配资 腾讯三分彩提现提不出来 浙江体彩十一选五的走势图 陕西快乐10分遗漏数据